7SAS17C A/C Compressor Assembly with Clutch — Ford Ranger 2019–2023

$497.05

7SAS17C A/C compressor assembly with clutch for the 2019–2023 Ford Ranger. Built to OE spec, ready to bolt on. Replaces UAC CO 11691C & Motorcraft YCC612.

Model 7SAS17C
Grooves / Pulley 6 · 109 mm
Voltage 12 V · no control valve
Fits Ranger ’19–’23

Confirm clutch & port layout before ordering.

SKU 204-14103

SKU: 204-14103 Category:
 

Description

A/C Compressor Assembly · 7SAS17C · Ford Ranger · SKU 204-14103

7SAS17C A/C compressor — Ford Ranger (2019–2023)

A complete 7SAS17C compressor assembly with clutch, built to OE specification for the 2019–2023 Ford Ranger. Ships ready to bolt on — 6-groove clutch, 109 mm pulley, 12 volt. A direct replacement for UAC CO 11691C and Motorcraft YCC612.

SKU: 204-14103 Ranger ’19–’23 7SAS17C Clutch included Denso-style
Air Components 204-14103 7SAS17C A/C compressor assembly with clutch for 2019-2023 Ford Ranger.
7SAS17C compressor assembly with clutch · Ford Ranger · replaces UAC CO 11691C
Match your compressor

Confirm these before you order

Compressors that look alike can differ at the clutch and ports. Check your original against this configuration:

Model7SAS17C
Clutch grooves6
Pulley diameter109 mm
Voltage12 V
Control valveNo
ClutchIncluded

Confirm before ordering. Match the clutch groove count, pulley diameter, and port layout to your original — or call us with your VIN and we’ll confirm the right compressor.

Why it’s the right part

A direct-fit replacement

OE-spec fit

Built to original-equipment specification for the 2019–2023 Ford Ranger — replaces UAC CO 11691C and Motorcraft YCC612.

Clutch included

Comes as a complete assembly with the 6-groove, 12 V clutch fitted — no separate clutch to source.

Denso-style build

Cross-references the Denso 447250-4442 / 4441 units for a proven, direct-fit replacement.

Wide interchange

Cross-references UAC, Ford, Motorcraft, Four Seasons, and more — see the table below.

Restores cooling

Brings the A/C back to full output when a worn or seized compressor has quit.

Complete the job right

Pair with a fresh drier, metering device, and the correct oil when the system is opened.

Fitment

Vehicle compatibility

Built for the following. Confirm your year, engine, and compressor configuration against your original before ordering.

MakeModelYears
FordRanger2019–2023

Confirm before ordering. Match your Ford or Motorcraft number and the clutch/port layout to your original, or call us with your VIN and we’ll confirm.

Cross-reference

OE & interchange numbers

Match your old compressor against the numbers below.

BrandPart number(s)
UACCO 11691C
Ford (OE)KB3B-19D629-AC · KB3B-19D629-AB · KB3B-19D629-BB · KB3Z-19703-A · KB3Z-19703-B · KB3Z-19703-C
MotorcraftYCC612 · YCC611 · YCC547
Denso447250-4442 · 447250-4441
Four Seasons168331
Omega20-22298
Global Parts Distributors7513438
Ranshu141720FD · 141720C · 141720NC
Specifications

Technical details

Air Components SKU204-14103
Compressor model7SAS17C
Clutch grooves6
Pulley diameter109 mm
Voltage12 V
Control valveNo
ClutchIncluded
Weight17 lb
Complete the repair

Renew these while the system’s open

Any time you replace a compressor, renew the wear parts and set the oil — it protects your new compressor and your warranty:

Filter

Accumulator / drier

Always replace the drier with the compressor so moisture and debris don’t reach the new unit.

Shop driers →
Metering

Orifice tube / expansion valve

Replace the metering device so refrigerant flows correctly and debris is caught.

Shop metering devices →
Oil & dye

A/C oil & UV dye

Set the correct oil charge for your system and add UV dye to catch future leaks fast.

Shop oil →
Installation

Fit it right

A new compressor fails fast if the system isn’t flushed and the oil isn’t set. Do it in order:

1

Recover & flush

Recover the charge, then flush the system to clear debris from any prior compressor failure.

2

Replace wear parts

Fit a new drier and metering device, and new O-rings at every connection you open.

3

Set the oil

Measure and set the correct oil charge for the system before install.

4

Evacuate & recharge

Pull a deep vacuum, then charge to the vehicle’s specification.

Order

Add to your order

Image Product Name SKU Price In Stock Quantity Add To Cart
Condenser Manifold Fitting · #6 Hose @ 3 O'clock · Custom / LS Swap 234-544 $47.25 47 in stock
Condenser Manifold Fitting · #6 Hose @ 6 O'clock · Custom / LS Swap 234-545 $47.25 45 in stock
Condenser Manifold Fitting · #6 Hose @ 9 O'clock · Custom / LS Swap 234-546 $47.25 48 in stock
A/C Compressor Manifold · High Side · #8 Hose @ 3 O'clock · 10S20F/10S17F 234-547 $47.25 32 in stock
A/C Compressor Manifold · High Side · #8 Hose @ 6 O'clock · 10S20F/10S17F 234-548 $47.25 15 in stock
A/C Compressor Manifold · High Side · #8 Hose @ 9 O'clock · 10S20F/10S17F 234-549 $47.25 42 in stock
A/C Compressor Manifold · Low Side · #10 Hose @ 3 O'clock · 10S20F/10S17F 234-550 $47.25 15 in stock
A/C Compressor Manifold · Low Side · #10 Hose @ 6 O'clock · 10S20F/10S17F 234-551 $47.25 45 in stock
Questions & answers

Compressor FAQ

Does it come with the clutch?
Yes — it’s a complete assembly with the 6-groove, 12 volt clutch fitted, so there’s no separate clutch to source.
Will it fit my Ranger?
It’s built for the 2019–2023 Ford Ranger. Confirm your clutch groove count, pulley diameter, and port layout against your original — or call with your VIN.
What does it replace?
UAC CO 11691C, Ford KB3B-19D629 / KB3Z-19703, Motorcraft YCC612 / YCC611 / YCC547, Denso 447250-4442 / 4441, and Four Seasons 168331 — see the cross-reference table.
Do I need to replace anything else?
Yes — always replace the drier and metering device, flush the system, and set the correct oil charge when fitting a compressor. Skipping these is the most common cause of a repeat failure.
Is this the same as the Explorer 7SAS17C?
No — both are called 7SAS17C, but the Ranger unit uses a 109 mm pulley with no control valve, while the Explorer unit uses a 116 mm pulley with a control valve. Match the configuration to your vehicle.
Not sure it’s the right compressor?

Match your compressor before you buy

Send us your year and VIN and we’ll confirm the right 7SAS17C compressor and the parts to complete the repair.

Add to cart ↑ Confirm my fitment
Call us: 480-507-2229

Ford®, Motorcraft®, Denso®, and all manufacturer names and part numbers are trademarks of their respective owners and are listed for identification and cross-reference purposes only; their use does not imply affiliation or endorsement. This is a replacement compressor assembly. Confirm year, engine, clutch configuration, and port layout against your vehicle before ordering.

Additional information

Weight 17 lbs
Dimensions 13 × 10 × 10 in

Cross References

Cross Reference

  • UAC: CO 11691C
  • Denso Automotive Systems: 4472504442
  • Denso Automotive Systems: 4472504441
  • Ford: KB3B19D629AC
  • Ford: KB3B19D629AB
  • Ford: KB3B19D629BB
  • Ford: KB3Z19703C
  • Ford: KB3Z19703A
  • Ford: KB3Z19703B
  • Four Seasons: 168331
  • Global Parts Distributors: 7513438
  • Motorcraft: YCC612
  • Motorcraft: YCC611
  • Motorcraft: YCC547
  • Omega: 2022298
  • Ranshu: 141720FD
  • Ranshu: 141720C
  • Ranshu: 141720NC

Year Make Model Submodel Engine
Year Make Model Submodel Engine
Loading...

Specs

Specifications

  • Control Valve (Y/ N): N
  • Grooves: 6
  • Pulley Diameter (mm): 109

Search by Vehicle

Not sure it fits? Call 480-507-2229 or send us a message.