Description
OEM Sanden SD7H15 A/C compressor — double-groove 12V
The genuine Sanden OEM SD7H15 (Model 4663) compressor — the factory part, not an aftermarket equivalent. Configured with a double-groove (2A) V-belt clutch, 12V operation, and a heavy-duty ear mount, it’s built to Sanden’s own tolerances for dependable, severe-duty cooling.
Looking to save on this repair?
This 204-7686 is the genuine Sanden OEM unit. If a value-priced replacement fits your budget and application, we also stock an aftermarket SD7H15 in the same double-groove 12V configuration — Air Components part 204-874.
View the value SD7H15 · 204-874 →Know exactly what you’re ordering
The configuration details that decide fitment on this compressor:
The genuine Sanden part
Genuine Sanden OEM
The factory Sanden SD7H15 (4663) — not an aftermarket copy. Exactly what the original equipment specified.
OEM tolerances
Built to Sanden’s own manufacturing standards for consistent fit, performance, and service life.
SD7H15 4663 config
Double-groove (2A) V-belt clutch, 12V, heavy-duty ear mount, JD cylinder head, clockwise rotation.
Wide interchange
Replaces a long list of OEM part numbers across major truck and equipment platforms — see the table below.
Severe-duty ready
The SD7H15 platform is a proven workhorse for commercial, agricultural, and industrial cooling.
Peace of mind
When the job calls for the genuine part the first time, this is the one to spec.
OEM interchange & cross-reference numbers
Match your old unit against the numbers below. This is also the genuine OEM counterpart to our value part 204-874.
| Brand / platform | Part number(s) |
|---|---|
| Sanden | 4663 |
| Air Components | 204-874 (value alternative) |
| UAC | CO 4663 |
| Airpro | 204663 |
| Red Dot | 75R84492 |
| MEI | 5709 |
| Omega | 2010080 |
| Kenworth | ABPN83304173 |
| Carlisle | 3012730 · 3012731 |
| Global Parts Distributors | 6513084 |
| Ranshu | 14SD4663 · 14SD4663C · 14SD4663NC |
| Austin Baker | 10364121 |
| Frigette | 204874 |
Technical specs
Same SD7H15 (4663) platform as our value part — for port sizes and displacement, see the 204-874 listing. Confirm refrigerant and oil requirements for your system before charging.
Install it right — protect the warranty
Compressor replacement calls for standard climate-control practice to keep the system clean and the new unit covered.
Flush the system
Clear out old oil, sludge, moisture, and debris from any prior compressor failure.
Renew components
Always fit a fresh receiver-drier and a new expansion valve alongside the compressor.
Set the oil
Confirm the correct oil type and total system charge for your application before start-up.
Evacuate deeply
Pull a full vacuum for 30–45 minutes to boil off trapped moisture before charging.
Recommended upgrade: Consider Fluoro-Dye Retrolube POE Oil (861-2112) during install — a superior lubricant with advanced thermal stability and integrated UV leak-detection dye for easier troubleshooting.
OEM Sanden SD7H15 (4663) FAQ
Is this a genuine Sanden OEM compressor?
How is this different from part 204-874?
What rotation is it?
What does it interchange with?
Do I need to replace anything else?
Shop the SD7H15 range
Browse SD7H15 compressor configurations and set your quantities in one place.
| Image | Product Name | SKU | Price | In Stock | Quantity | Add To Cart |
|---|---|---|---|---|---|---|
|
Sanden SD7H15 A/C Compressor (Model 4663) - 2-Groove 125mm 12V Vertical O-Ring | 204-874 | Original price was: $327.85.$249.00Current price is: $249.00. | In stock | ||
|
SD7H15 · 2-Groove V-Belt · Kenworth / Peterbilt | 204-1559 | $297.43 | In stock | ||
|
COMPRESSOR FLX7 4420 PAG DIR MT 119mm PV8 12V GV204-5053 | 204-5053 | $306.38 | In stock | ||
|
V SD7H15 119DIA 37.64GA PV8GV EAR R134A3/4 X 7/8 12V JD HEADSANDE | 204-878 | $306.18 | In stock | ||
|
Compressor Sanden 7H15 PV 8 Groove 12 Volt Cross Bolt | 204-879 | $327.25 | In stock | ||
|
SD7H15 119 49GA PV8GRV DIRECT R134A1 X 14 12 JDA 2WIRE MALE SPADE | 204-5015 | $317.98 | In stock | ||
|
SD7H15 119DIA 61.46GA PV8GV R134APAD 12 GWA 2WIRE MALE SPADEOEMS: | 204-5046 | $317.15 | In stock | ||
|
Compressor Sanden SD7H15 Vertical Oring 8 & 10 119MM PV8 12V | 204-7860 | $286.85 | In stock |
Match your compressor before you buy
Clutch, port, mount, and wiring configurations vary. Send us your old unit’s numbers and we’ll confirm the right SD7H15 for your equipment.
Add to cart ↑ Confirm my fitmentSanden® and all manufacturer, OEM, and platform names and part numbers are trademarks of their respective owners. This is a genuine Sanden OEM product; other brand part numbers are listed for identification and cross-reference purposes only and do not imply affiliation or endorsement. Confirm clutch, port, mount, voltage, and wiring configuration against your application before ordering.
